We've provided this printable version of our review for your convenience. Please remember that your shopping clicks support this site. If you think this camera is a good choice for you, please consider returning to the link below to check prices and make a purchase via our shopping links.

Also note that this is just one of the pages from this review. Full reviews have several pages with complete analysis of the many test shots we take with each camera. Feel free to download and print them out to see how the camera will perform for you.

Full Review at: http://www.imaging-resource.com/PRODS/T3/T3A.HTM

Like this camera?
Save money online!
Prices as of 08/30/2014
Save Money!
Canon T3

No price data available. Check back soon.

Canon T3 Live View

Like most SLRs these days, the Canon T3 features a Live View mode for its rear-panel LCD monitor. The Live View mode lets you use the LCD monitor as a large viewfinder, and offers an exposure simulation function which attempts to display the expected outcome of your chosen exposure settings. A dedicated Movie / Live View button is used to activate or disable Live View mode on the Rebel T3, and the function is available in all still image shooting modes. (In Movie mode, the live view feed cannot be disabled, and the same button instead acts to start or stop movie recording.)

The Canon T3's Live View mode feature set is comprehensive, and the display offers a lot of information such as current settings, exposure, and composition aids (see illustration below, courtesy of Canon USA). The Canon T3 groups settings related to Live View shooting in Record Menu 4, a much more logical location that that used by older Rebel-series models, which hide these options in a separate Live View / Movie menu accessed through Setup Menu 2. There's still a little possibility of confusion though, since several options are duplicates of those in the Movie menus, and so if they're changed in one menu, the equivalent variable will have changed on return to the other menu. A nice feature of Canon's Live View mode is that it doesn't immediately stop the live view feed when you enter the camera's menu system, or switch between operating modes. Some rival cameras will immediately terminate the live view stream and drop the camera's mirror in either instance, causing unnecessary wear and tear on the mirror and shutter mechanisms if you were intending to immediately continue live view shooting.

The Live View mode also includes a greatly abbreviated equivalent of the Quick Control menu screen that's available when shooting using the viewfinder, accessed using the rear-panel Quick Control button. Instead of filling the screen, it is shown as a single column of icons at the left of the LCD display, and allows adjustment of AF mode, Drive mode, White Balance, Picture Style, Auto Lighting Optimizer, Image Quality / Size, and ISO Sensitivity, as well as selection of the active AF point if using Quick mode autofocus.

The T3's Live View mode offers three autofocus modes, selected through the Live View function settings screen or Quick Control menu: "Quick mode," which employs the camera's dedicated phase-detection sensor, as it would when using the optical viewfinder, plus two contrast-detection autofocus types--"Live mode" and "Face Detection Live mode"--which both operate on data streamed from the image sensor itself. Face Detection Live mode can detect multiple faces in the frame, but only selects (and indicates) one face on which the camera will set focus and exposure. The selected face can be changed by pressing the left and right arrow keys to jump through the detected faces in either direction. The contrast detection modes are slower than phase-detection focusing, but don't require the mirror briefly drop to redirect light to the phase-detection AF sensor, which interrupts the live view display in Quick mode. The contrast detection modes can also be more accurate, and allow the AF point to be positioned anywhere within the image frame (except for the extreme edges), rather than being limited to the T3's nine fixed AF points. On the flip side, Quick mode AF can be noticeably faster, even when taking account of the time to cycle the mirror, especially when shooting in low-light or with low-contrast subjects. Quick mode is also better suited to moving subjects, which can make it challenging to achieve a focus lock using contrast detection AF.

The point(s) at which a focus lock was achieved in Quick mode AF are indicated on the live view feed with a green focus point indication immediately after the live view feed resumes, since the feed must be briefly interrupted during focusing. Alternatively, you can bring your eye to the viewfinder during the AF operation. Even though you're framing images using the LCD display, the viewfinder becomes visible with the mirror dropped for focusing, and the active AF point(s) are still indicated for the brief time that the optical view is available, perhaps letting you judge whether to trip the shutter just slightly earlier. Manual focus is also supported in live view mode, and includes either 5x or 10x image magnification to assist.

In Live View mode, evaluative metering is always used to determine correct exposure, though exposure compensation is available. The Exposure Simulation function will attempt to recreate the exposure level that would be obtained with your current settings on the LCD display. This may raise noise levels of the live view feed beyond what could be expected in the final image, since it must operate with a fast enough shutter speed to achieve its required refresh rate. The aperture also remains open by default, and so the exposure simulation doesn't indicate the areas in focus unless you configure the Set button to provide depth-of-field preview, and then hold it down during live view. Exposure Simulation will attempt to continue even with depth of field preview active, though this may raise the live view noise levels even further. If you pass outside the range where the live view feed can simulate your exposure, the "Exp. Sim" icon near the bottom right of the LCD will blink, as a warning. Unlike in more sophisticated Canon SLRs, you can't disable exposure simulation, and so there's no way to obtain a clear live view feed with which to judge focus and framing, without being shown the effect of your exposure variable choices.

You can enable one of two different overlays, which divides the screen with either a 2x2 grid, or a 5x3 grid, useful for precise image framing. You can also specify how long the camera's metering system should remain active without user interaction, within a six-step range from four seconds to thirty minutes. It's overruled by the Auto Power Off function, so whichever timer is shorter will apply. Also, Live View shooting can be disabled altogether if you don't use it, preventing the mode being accidentally triggered by bumping the Movie / Live View button.

The EOS Utility software (included with the camera) allows you to shoot remotely via USB connection while viewing the Live View image on your computer. You can also display the Live View image on an HDTV with an optional HDMI cable, but not on standard-def displays, since the T3 lacks any provision for composite video output.

The Canon T3 comes equipped with a temperature sensor, and if the internal temperature exceeds an undisclosed threshold, Live View will be disabled to protect internal circuitry from overheating. A high temperature icon is displayed on the LCD monitor to warn the user that image degradation may be occurring, and that the camera may disable Live View until normal operating temperature is restored.

Like a larger version of the optical viewfinder display, the Live View display reports the exposure information along the bottom of the screen, with additional settings and information overlaid to the left and right, as well as the selected focus area(s). The amount of information displayed can be varied by pressing the INFO button, toggling through four display modes -- image only, image plus basic exposure information, image plus detailed exposure information, and finally image plus detailed exposure information alongside either an RGB or luminance histogram.

 

Canon T3 Live View options
The Canon T3 offers a comprehensive set of options for Live View mode, enough to warrant its own page in the Record menu.
Varying amounts of information can be displayed in Live View mode. Pressing the INFO button adds information in stages, starting with no information, a display with minimal information across the bottom, another (seen above) with more info overlaid on the left and right sides, and finally one with an added RGB or luminance histogram, depending on which is selected in Playback Menu 2. (Unfortunately the histogram isn't movable, and so unfortunately obscures most of the top right quadrant of the display.)
A 2x2 grid can be overlaid to aid composition or alignment.
An alternate 5x3 grid overlay option (Grid 2) is also available.
The T3's Live View mode offers an abbreviated equivalent of the Quick Control menu, accessed using the same Quick Control button as when shooting with the optical viewfinder. The vertical arrow keys select which option to adjust, while the Main dial or the horizontal keys makes the adjustment. The set key will call up a menu showing all available selections for one specific option.
Here, the effect of changing exposure by adjusting the shutter speed is simulated. (Note that this particular animation comes from our Rebel T2i review, but the function operates similarly on both cameras.)
A white box at the center of the live view feed. indicates the area that can be enlarged to aid in manual focusing or confirmation of precise autofocus, and can be moved around the image frame (except to extreme edges). Pressing the zoom button magnifies what's in the magnifying frame by 5x. Pressing the zoom button again zooms in to 10x, great for checking critical focus, or for manually focusing. Once zoomed in, you can move the magnified area around in the box, using the legend at bottom right as a guide. If "Face Detection Live AF" mode is enabled, magnifying the image is not possible, though you can always check critical focus by magnifying the captured image, or temporarily switching to Manual focus mode. Note that this screenshot was captured on the T3's HDMI port, and hence the layout has been changed to move the panning guide outside of the image area, since the HD output has a wider aspect ratio than the LCD panel.