Black Friday 2026: camera deals are going live nowSee the best deals →

Canon Issues Service Notice Over Potentially Dangerous RF Teleconverter Locking Issue

canon rf 1.4x extender

Imaging Resource is reader-supported. When you buy through links on our site, we may earn an affiliate commission. How this works.

Canon has issued a service notice warning users about a potential locking issue with its RF 1.4x and RF 2x teleconverters. The problem could cause attached lenses to become improperly secured and potentially detach from the extender during use.

According to Canon Rumors, the issue can make a lens feel as though it is securely locked onto the teleconverter even when the locking mechanism has not properly engaged. In some cases, the lens could detach and fall, potentially resulting in expensive damage, particularly when using large and costly telephoto lenses.

Canon Malaysia has published a service notice outlining the problem and advising users to check the locking mechanism before using their equipment.

ā€œIf the lens release lever feels stiff and cannot operate smoothly, the RF lens may not be locked in place correctly. If used in this condition, the RF lens may come off,ā€ Canon warns.

How to Check Your RF Teleconverter

Canon advises users to check two things when attaching an RF lens to either teleconverter:

  • Make sure the RF lens is securely attached to the extender and properly locked in place.
  • Check that the lens release lever moves smoothly when pressed, without any stiffness.

Canon USA has also issued guidance, warning that anything unusual when operating the release lever could indicate a problem. This includes situations where the lever feels stiff or seems to catch on something instead of moving smoothly.

If users notice any unusual behavior, Canon recommends requesting an inspection and repair through their nearest authorized service center.

Canon Offers Inspections and Repairs

Canon’s service notice does not explain the exact cause of the locking issue or detail which components may need to be repaired or replaced. However, the company is offering free repairs for affected equipment.

For now, owners of Canon’s RF 1.4x and RF 2x teleconverters should inspect the locking mechanism before attaching expensive lenses. If the release lever feels stiff or does not operate normally, avoid using the combination until it has been inspected by Canon.

Canon has not issued a broader public comment on the issue beyond its service notices.

More in News

All News